CitroËn
Corporate Identity
NEW VEHICLE DEALER / INTERIOR / ENVIRONMENT / FLOORING

FLOORING

Citroën Corporate Identity
All new and existing dealerships are required to retile all areas of the showroom and service reception using the Citroën New CI specifications.
[click here] to download a PDF of full specification details of the correct tiles from supplier Minoli.
Please refer to the ‘SUPPLIER’ page in main menu for full list of suppliers and correct corporate flooring required for each area.
Please refer to the ‘SUPPLIER’ page in main menu for full list of suppliers and correct corporate flooring required for each area.
Floor Tiles:
600 x 600 x 9mm Ref: C.S.V GRIS D246 RECT Porcelain, frost resistant tile with R9 Slip rating. The tile joint is to be 3mm.
Tile Grout:
BAL Supaflex wide joint grout Colour: Grey.
Tile Movement joints:
Stainless Steel proprietary movement joint strips installed at a maximum 6m centres or over floor slab joints Ref SchluterDilex 15mm overall width with 10mm minimum expansion strip, Colour or insert Grey to match grout colour.
All junctions of tiles and carpet to be finished with Schluter Reno U Stainless Steel 10mm high transition strips Ref : EU100. The angles and tiles are to be fixed in accordance with the manufacturers Method Statement. Tile perimeter at junctions with walls, columns etc: Joints left free of grout and mastic sealant installed Ref: MapeiMapesil AC, colour: Grey to match grout.
Supplier:
Minoli Tiles Ltd . Transport Way, Cowley, Oxford. OX4 6LX
Conact:
01865 778225 – Jonathon Minoli (jonathon@minoli.co.uk) or Sophie Doran (sophie@minoli.co.uk)

Customer Seating Area, and front of Service/Parts Reception Desking

Utility Floor Tiles:
900 mm x 600 mm x 11mm Eiffeilgres Sensible Sign Black., with a Schulter DILEX-EKSN Code:ESKN125GS between the black and grey showroom floor tiles.
Note: Tiles to be laid stack bonded not stretcher brick bonded.
Tile Grout:
Norcros wide joint flexible floor & wall tile grout, Colour:Black
Supplier:
Solus Ceramics, Unit 1, Cole River Park, 285 Warwick Road, Birmingham.B11 2QX
Contact:
David Overton – davidoverton@solusceramics.com or 07595 203 315 / 0121 753 0777

Barrier

The use of Barrier matting is recommended in all entrances to the showroom and behind the Service/Parts reception desking, also in areas of high foot traffic from the workshop area. The matting is designed to remove dirt and moisture from soles of customer and technicians shoes.
Nomad 3M matting Ref: Aqua 8500 Slate Grey. Area below matting to be screeded to bring level of matting up to match adjacent floor tiles.
Form mat wells with SchluterSchiene Stainless Steel tile angle trim Ref E100V4A
Entrance dimensions:
to suit existing barrier matting otherwise, 2.5m into the showroom at the width of the entrance doors.
Workshop Reception dimensions:
to suit back of desk width and between the desk(s) and Red (RAL 3000) painted back wall of these departments.
Supplier:
Flooring Concept Solutions. Unit 3, 31 Clerkenwell Close, London. EC1R 0AT
Contact:
Simon Herman simon@flooring-concepts.co.uk, t: 0844 561 0918

Customer Toilets

Tiles:
600 x 300 x 9mm Ref: C.S.V GRIS D246 RECT Porcelain, frost resistant tile with R9 Slip rating. The tile joint is to be 3mm.
Grout:
BAL Supaflex wide joint grout Colour: Grey.
Movement joints:
Stainless Steel proprietary movement joint strips installed at a maximum 6m centres or over floor slab joints Ref SchluterDilex 15mm overall width with 10mm minimum expansion strip, Colour or insert Grey to match grout colour.
All junctions of tiles and carpet to be finished with Schluter Reno U Stainless Steel 10mm high transition strips Ref : EU100. The angles and tiles are to be fixed in accordance with the manufacturers Method Statement. Tile perimeter at junctions with walls, columns etc: Joints left free of grout and mastic sealant installed Ref: MapeiMapesil AC, colour: Grey to match grout.
Supplier:
Refer to main showroom tiles for details – t: 0844 561 0918

Customer Facing Offices

The use of Barrier matting is recommended in all entrances to the showroom and behind the Service/Parts reception desking, also in areas of high foot traffic from the workshop area. The matting is designed to remove dirt and moisture from soles of customer and technicians shoes.
The requirement to replace carpet tiles in this area is at the discretion of your regional C.I. Network Consultant and/or Architect
Flooring/staircases:
The treads & risers are to be in carpet tiles Ref: Lano Flooring Solutions carpet Ref: Zen Sb/FS: Zen.800 Black with double sided underlay. Gradus natural
aluminiumnosings and non-slip inserts colour: Light Grey or White for DDA colour contrast.
UK Contact:
Kevin Beasant – Mobile +44 78 9449 9879 – Tel: +44 208 449 9027 – Fax: +44 208 449 9027 Lano Flooring Solutions, 44 • 8530 Harelbeke, Belgium. t: +32 (0)56 65 40 00